Danfoss ADAP-KOOL AKD 102 Operating Instructions Manual page 32

Electrical Installation
WARNING
The earth connection cable cross section must be at least 10 mm
to EN 50178/IEC 61800-5-1.
5 5
Illustration 5.5 Then mount mains plug and tighten wires.
Illustration 5.6 Finally tighten support bracket on mains wires.
NOTE
With single phase A3 use L1 and L2 terminals.
32
®
ADAP-KOOL Drive Operating Instructions
2
or 2 rated mains wires terminated separately according
®
MG.11.L4.02 - ADAP-KOOL Drive