Danfoss ADAP-KOOL AKD 102 Operating Instructions Manual page 79

How to Programme the Frequ...
▲
change. [ ] key increases the value, [
decreases the value.
7. Press [Cancel] key to disregard change, or press
[OK] key to accept change and enter new setting.
7.1.7 Changing a text value
If the selected parameter is a text value, change the text
value by means of the up/down navigation keys.
The up key increases the value, and the down key
decreases the value. Place the cursor on the value to be
saved and press [OK].
Illustration 7.11 Display example.
7.1.8 Changing a group of numeric data
values
If the chosen parameter represents a numeric data value,
change the chosen data value by means of the [◄] and [►]
navigation keys as well as the up/down [
keys. Use the ◄] and [►] navigation keys to move the
cursor horizontally.
Illustration 7.13 Display example.
Use the up/down navigation keys to change the data
value. The up key enlarges the data value, and the down
key reduces the data value. Place the cursor on the value
to be saved and press [OK].
Illustration 7.14 Display example.
®
ADAP-KOOL Drive Operating Instructions
▼
7.1.9 Changing of data value, Step-by-Step
] key
Certain parameters can be changed step by step or
infinitely variably. This applies to 1-20 Motor Power [kW],
1-22 Motor Voltage and 1-23 Motor Frequency.
The parameters are changed both as a group of numeric
data values and as numeric data values infinitely variably.
7.1.10 Read-out and programming of
Parameters are indexed when placed in a rolling stack.
15-30 Alarm Log: Error Code to 15-32 Alarm Log: Time
contain a fault log which can be read out. Choose a
parameter, press [OK], and use the up/down navigation
keys to scroll through the value log.
Use 3-10 Preset Reference as another example:
Choose the parameter, press [OK], and use the up/down
navigation keys keys to scroll through the indexed values.
To change the parameter value, select the indexed value
and press [OK]. Change the value by using the up/down
keys. Press [OK] to accept the new setting. Press [Cancel]
to abort. Press [Back] to leave the parameter.
▲ ▼
] [ ] navigation
®
MG.11.L4.02 - ADAP-KOOL
indexed parameters
Drive
7 7
79