Danfoss ADAP-KOOL AKD 102 Operating Instructions Manual page 40

Electrical Installation
5.1.17 Access to Control Terminals
All terminals to the control cables are located underneath the terminal
cover on the front of the frequency converter. Remove the terminal
cover with a screwdriver.
5 5
Remove front-cover to access control terminals. When replacing the
front-cover, please ensure proper fastening by applying a torque of 2
Nm.
40
®
ADAP-KOOL Drive Operating Instructions
Illustration 5.17 Access to control terminals for A2, A3, B3, B4,
C3 and C4 enclosures
Illustration 5.18 Access to control terminals for A5, B1, B2, C1
and C2 enclosures
®
MG.11.L4.02 - ADAP-KOOL Drive