Cockpit App - Otto Bock C-Leg 3C98-3 Instructions For Use Manual

7 Cockpit app

Information on the Cockpit app
• The Cockpit app can be downloaded free of charge from the respective online store. For
more information, please visit the following website: https://www.ottobock.com/cockpitapp.
To download the Cockpit app, the QR code on the supplied Bluetooth PIN card can also be
read with the mobile device (requirement: QR code reader and camera).
• The language of the user interface in the Cockpit app can be changed using the adjustment
software.
• Depending on the version of the Cockpit app being used, the language of the user interface in
the Cockpit app corresponds to the language of the mobile device on which the Cockpit app
is being used.
• The serial number of the component to be connected has to be registered with Ottobock the
first time it is connected. If the registration is not accepted, use of the Cockpit app for this
component will be limited.
• Bluetooth on the prosthesis must be turned on in order to use the Cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down (sole of
the foot must point up) or by connecting/disconnecting the battery charger. Bluetooth is then
turned on for approx. 2 minutes. During this time, the app must be started and used to estab­
lish a connection. If required, Bluetooth on the prosthesis can be switched on permanently
afterwards (see page 28).
• The illustrations in these instructions for use are only examples and may deviate from the
respective mobile device being used and the version.
• Keep the mobile app up to date at all times.
• Please contact the manufacturer if you suspect cybersecurity problems.
7.1 System Requirements
See the information in the Apple App Store or Google Play Store regarding compatibility with
mobile devices and versions.
7.2 Initial connection between cockpit app and component
The following points need to be observed before establishing the connection:
• Bluetooth of the component must be switched on (see page 28).
• Bluetooth on the mobile device must be switched on.
• The mobile device must not be in "flight mode" (offline mode), otherwise all wireless connec­
tions are turned off.
• The mobile device must be connected to the Internet.
• The serial number and Bluetooth PIN of the component being connected must be known.
They are found on the enclosed Bluetooth PIN card. The serial number begins with the letters
"SN".
INFORMATION
If the Bluetooth PIN card with the Bluetooth PIN and serial number of the component is lost,
contact your O&P professional.
The Cockpit app enables switching from basic mode to the pre-configured
MyModes. In addition, information about the product (step counter, battery
charge level, etc.) can be retrieved.
The everyday behaviour of the product can be changed to a certain extent
using the app (e.g. while becoming accustomed to the product). The O&P
professional can use the adjustment software to track these changes at the
next appointment.
17