Figure 38: Example Of Attaching The Brackets To The At-X550-18Xspqm Switch; Figure 39: Installing The Switch In An Equipment Rack - Allied Telesis x550 Series Installation Manual

Chapter 3: Installing the Switch on a Table or in an Equipment Rack
76
Figure 38. Example of Attaching the Brackets to the AT-x550-18XSPQm
3. Have another person hold the switch at the desired location in the
equipment rack while you secure it using four standard equipment rack
screws (not provided). Refer to Figure 39.
Figure 39. Installing the Switch in an Equipment Rack
4. Go to Chapter 5, "Powering On the Switch" on page 91.
Switch