Figure 54: Switch Initialization Messages (Continued) - Allied Telesis x550 Series Installation Manual

Received event network.initialized
00:50:36 awplus-1 VCS[688]: No Neighboring members found, unit may be in a
standalone configuration
Received event vcs.elected-master
00:50:36 awplus-1 VCS[688]: Startup speed can be improved by adding 'no stack
1 enable' to configuration
00:50:36 awplus-1 VCS[688]: Member 1 has become the Active Master
Assigning Active Workload to HA processes:
hsl, nsm, epsrd, lacpd, lldpd, loopprotd, mstp
onmd, ospf6d, ospfd, pdmd, ripd, ripngd, rmond
vrrpd, ayuthd, bgpd, irdpd, pim6d, pimd, pimd, sflowd
imi, imiproxyd
Received event network.activated
Loading default configuration
Warning: flash:/default.cfg does not exist, loading factory defaults.
..
done!
Received event network.configured
awplus login:
Figure 54. Switch Initialization Messages (Continued)
After the switch has initialized its management software, go to Chapter 6,
"Configuring the Switch for Stand-alone Operations" on page 99.
x550 Series Installation Guide for Stand-alone Switches
97