Table of Contents
Advertisement
Chapter 1: Overview
Switch ID LED
40
The Switch ID LED, shown in Figure 10, displays the ID number of the
switch. A stand-alone switch has the ID number 0. Switches in a VCStack
have the numbers 1 to 4. Chapter 5, "Powering On the Switch" on page 91
has the procedure for verifying and, if necessary, changing the ID number
of the switch for stand-alone operation.
Switch ID LED
The states of the LED when the switch is not operating in the low power
mode are shown in Figure 11.
The switch is booting up.
The switch has encountered a fault condition.
The switch is operating as a stand-alone unit.
The switch has an ID number of 1 to 4 as part of a
VCStack.
The dot in the lower right corner flashes when the switch
accesses USB memory.
The switch displays the letter "F" for fault on the ID LED if it detects one of
Figure 10. Switch ID LED
Figure 11. Switch ID LED
Advertisement
Table of Contents
