Table 9. PoE LEDs for the 1/2.5/5/10Gbps Ports on the AT-x550-
State
Green
Solid Amber
Off
x550 Series Installation Guide for Stand-alone Switches
18XSPQm Switch
Description
The switch is delivering power to a powered
device (PD) on the port.
The switch has shut down PoE on the port
because of a fault condition.
This LED state can result from the following
conditions:
- The port is not connected to a PD.
- The PD is powered off.
- The port is disabled in the management
software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs,
use the eco-friendly button.
29