Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
Follow the steps below:
i Select a pre-set MQTT Publish Topic message from the dropdown
list of the "Broker" and "Message" fields. The MQTT Publish
Topic message will be displayed for you to verify if this is the
MQTT Publish Topic message you are going to send to.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.2.7 Timer
You can change the Timer status (to Start or to Reset the Timer) in the
THEN/ELSE Action statement; the editing page for Timer Action
Setting is shown as below:
Follow the following steps:
i Select the pre-defined Timer from the dropdown list of the "Timer"
field. Please note: the Timer you select has to be created in
Advanced Setting.
ii Specify you want to "Reset" or "Start" this Timer when this
THEN/ELSE Action statement is executed. The Start Action will
start to run the Timer and if the Start Action is triggered one more
time when the Timer is running, the Timer will restart again. The
Reset action will reset the Timer and stop running the Timer.
iii Click "OK" button to save the settings. The popup window will be
closed and return to the Rule settings page.
11.2.8 Email
You can send a Email message to an Email group when executing a
THEN/ELSE Action statement; the editing page is as below:
Figure11-37 : Timer action setting page
213
Advertisement
Table of Contents
