Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
ii Set up the expression statement for the content of this Subscribe
iii Specify the user-defined evaluation value. If the content of this
iv Click "OK" button to confirm the settings and return to the Rule
11.1.7 Connection Status
Connection Status can be included in the IF condition statements; the
editing page for Connection Status Condition Setting is shown as
below:
Follow the steps below:
i Specify the module from the dropdown list of the "Module" section
that you are going to include its Connection Status in the IF
condition statements.
ii And then specify the Connection Status to be "Offline" or "Online".
If the Connection Status of the module match the evaluation criteria,
the result of this condition evaluation will be "true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.1.8 Timer
Timer condition can be used as evaluation criteria for IF condition
statement; the editing page for timer condition setting is shown as
follow:
them in the IF condition statements.
Topic. Select an operator from "=", ">", "=" or "<=".
Subscribe Topic match the evaluation criteria, the result of this
condition evaluation will be "true". PMC-52xx/PMD provides 7
values options; you can compare them with the content of this
Subscribe Topic for condition evaluation. Please refer to
"11.1.1.3
AI" for detail.
settings page.
Figure11-17 : Connection Status condition setting page
198
Advertisement
Table of Contents
