Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
10.2 SMS Setting
PMC-5231M-4GE/PMC-5231M-4GC/PMC-5231M-3GWA/PMC-5151/PM
D offers SMS Alarm message sending and SMS Command receiving
functions (PMC-5151/PMD required ICP DAS GTM-203M-3GWA modem.
Please refer to
to send pre-set SMS alarm message to specific phone numbers. For SMS
command function; it allows to set up authorized phone numbers to receive
SMS commands. PMC/PMD will execute the commands received from
authorized phone numbers only. There are 2 types of SMS commands:
Retrieve channel data (GET): The user can retrieve specific channel
real-time data. One SMS Command message can require up to 10
channel data values. The user could add the encoded string to the
message to retrieve the related channel data.
Modify channel data (SET): The user could modify channel data by
SMS command. Each SMS command message allows to modify one
channel value.
10.2.1 SMS Alarm Setting
The SMS Alarm Setting page is shown as below:
Please follow the steps below:
i Make sure the "SMS Alarm" Tab is selected.
ii In the PIN field, input the 4 digit SIM card PIN code. If the PIN
code is not required, leave the field blank.
Appendix III
for detail). For SMS Alarm function; it allows
Figure10-6 :
SMS Setting Page (1)
157
Advertisement
Table of Contents
