Figure10-35 : Pue Setting Page(1) - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual
The settings steps are as below:
i Click on "Add new PUE" to add a new PUE option.
ii After clicking the "Add new PUE", a setting page will appear, select the
number of the PUE from the dropdown list, input name in the "Name"
field and you could also input the description of this PUE in the
"Description" field.
iii Setup the calculation expressions of the "Total Facility Energy", and
users can click "add" button to modify the expressions.
iv Setup the calculation expressions of the "IT Equipment Energy", and
users can click "add" button to modify the expressions
v Select the "Data Classification" of the PUE.
vi Setup the minimum and maximum display value of the chart on the
main page.
vii Setup the marker display name and value of the chart on the main page.
(This will affect color of the chart. If you do not enable, it to calculate
the color change of the chart based on the minimum and maximum
values.)
viii Setup the PUE value format on the main page.

Figure10-35 : PUE Setting Page(1)

179