Xw-Board/Xv-Board Do Channel Settings; Figure7-19 : Xw-Board Di Attribute Setting Page - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual
The settings are as follow:
 Nickname：For user to define nicknames for each I/O channel, this
nickname will be displayed on the "I/O Information" and "Rule
Setting" pages.
 Counter Type ： Specify the counter type to be "Falling"
(ON-to-OFF) or "Rising" (OFF-to-ON); if you select "Disable"
indicates that the counter of this DI channel will not function.
 Counter Initial Value：Set the initial value of the counter in the
"Counter Initial Value" field. This counter will start counting from
the initial count value. The default initial value is 0.
After the DI channel settings are completed, continue to perform
settings of other channels, after all settings are completed click "Save"
button to save the changes and return to XW-Board/XV-Board Setting
page.
7.2.2

XW-Board/XV-Board DO Channel Settings

The XW-Board/XV-Board DO Channel Setting page is shown as
follow (using PMC-5151+XW107 as an example):
Figure7-19 : XW-Board DI attribute setting page
91