Advertisement
Quick Links
Supported Models
PMC-5231
PMC-5231M-4GE
Technical Support
PMC-52xx User Manual:
CD: \PMC-52xx\Document
http://pmms.icpdas.com/en/download.html
PMC-52xx Official Website:
http://pmms.icpdas.com/en/PMC.html
What's in the box?
The package includes the following items:
or
PMC-5231
PMC-5231M-3GWA/
Screw Driver
Pin Terminal* 16
PMC-52xx Quick Start
4GE/4GC
(Only for PMC-5231M-3GWA / 4GE / 4GC)
GSM/GPRS Antenna
(ANT-421-04)
PMC-5231M-3GWA
PMC-5231M-4GC
Software Utility CD * 2
microSD card
44 mm
DIN-Rail Clip
v1.0, November 2017
M3x6L
Screw* 4
Advertisement
Related Manuals for ICP DAS USA PMC-52 Series
Summary of Contents for ICP DAS USA PMC-52 Series
- Page 1 PMC-52xx Quick Start v1.0, November 2017 Supported Models PMC-5231 PMC-5231M-3GWA PMC-5231M-4GE PMC-5231M-4GC Technical Support PMC-52xx User Manual: CD: \PMC-52xx\Document http://pmms.icpdas.com/en/download.html PMC-52xx Official Website: http://pmms.icpdas.com/en/PMC.html What’s in the box? The package includes the following items: Software Utility CD * 2 PMC-5231 PMC-5231M-3GWA/...
- Page 2 Configuring the Boot Mode Before starting PMC-52xx at the first time, be sure that the switch is placed in the “0” position. The rotary switch must be placed in the "0" position Connect to PC, Network and Power The PMC-52xx is equipped with an RJ-45 Ethernet port for connection to an Ethernet hub/switch and PC.
- Page 3 Using Browser to Assign a New IP The PMC-52xx is an Ethernet controller, which comes with a default IP setting; therefore, you must first assign a new IP setting to the LAN1 port of PMC. The factory default IP settings of PMC are as follows: Item Default...
- Page 4 Go to PMC-52xx Web Site for Power Management Please follow the steps below to build a power monitoring and management applications with ICP DAS PMC-52xx & Power Meter. Step 1: Open a browser, and type in the URL address of the PMC Open a browser and type in the URL address(The new IP setting) of the PMC in the address bar.