Figure10-34 : Repeat Mode Of Schedule Setting - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual
(c.) On the calendars, click to toggle highlight on the dates you'd
 Repeat：
(a.) In the "Day(s) of week" section, click on the day(s) in a week
Time Range.
like to execute or not execute the operations for this Schedule.
If the date shows a light green background, it indicates the date
is "In Range" of the schedule, that is, that date falls into the
range that will execute the operations. On the contrary, if the
date shows a light grey background, it indicates that date is
"Out of Range" of the schedule, that is, that date falls out of the
range and will not execute the operations.
will be "In Range", that is, during the date range you select, the
operation will be executed every day.
used to set all dates to be "In Range"; whereas
button is for marking all dates to be "Out of Range". The
Weekday button is for you to select all Mondays to Fridays to
be "In Range", and Saturdays and Sundays to be "Out of
Range", that is, the operations will be executed during
weekdays only. On the contrary, the
to set all Saturdays and Sundays to be "In Range", and all
Mondays to Fridays to be "Out of Range", that is, the
operations will be executed during weekends only.
that is going to execute the schedule; shown as below:

Figure10-34 : Repeat mode of Schedule setting

By default, all dates
"Select All"
button is
"Unselect All"
Weekend button is for you
177