Icp Das Module; Figure11-25 : Di Counter Action Setting Page; Figure11-26 : Do Action Setting Page - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual
until the IF Condition turns to be TRUE again.
 Repeat: when the IF Condition is TRUE, this Action will be executed
repeatedly until the IF Condition turns to be FALSE.
The setting options of THEN/ELSE Action are as follow:

11.2.1 ICP DAS Module

Click on ICP DAS Module(XW-Board/XV-Board/M-7000/DL), 3
options will appear as the following: DI Counter, DO, and AO.
11.2.1.1 DI Counter
You can reset DI counter of the XW-Board/XV-Board/M-7000
modules in the THEN/ELSE Action statement; the editing page for
DI counter Action is shown as follow:
Follow the steps below:
i
ii Click "OK" button to confirm the settings and return to the
11.2.1.2 DO
You
XW-Board/XV-Board/M-7000/DL module in the THEN/ELSE
Action statement; the editing page for DO Action is shown as
follow:

Figure11-25 : DI Counter action setting page

Select the DI channel to reset DI counter from the dropdown
list of channel field in the "Module & Channel" section.
Rule settings page.
can execute

Figure11-26 : DO action setting page

an action in DO channel of
204