ICP DAS PMC/PMD Series User Manual
11.2 THEN/ELSE Action Setting
To add a THEN/ELSE Action, please select and set the Action from the
dropdown list in the "Add a new Action" field under the THEN/ELSE
Action setting section.
ICP DAS Module
Modbus Module
Power Meter
Microsoft Azure
IBM Bluemix
MQTT
Timer
Email
SMS Alarm
SNMP Trap
LINE Notify
Data Logger
Rule Status
Internal Register
If the PMC/PMD is connected to ICP DAS XW-Board/XV-Board/M-7000/
DL I/O modules, ICP DAS power meters or Modbus TCP/RTU modules,
the setting options for I/O channel information (AO、DO、Coil Output 和
Holding Register) will be automatically displayed on the dropdown list.
To include subjects other than modules mentioned above in the
THEN/ELSE Action statement; they have to be pre-defined in Advanced
Setting first. The setting options of the subjects that already being defined in
Advanced Setting will appear on the dropdown list of THEN/ELSE Action.
Select the Action option from the dropdown list in the "Add a new Action"
field under the THEN/ELSE Action setting section, a window will pop up
for you to edit detailed information. The THEN Action statement will be
executed only when the result of IF condition statement is found "true";
otherwise the ELSE Action statement will be executed. In order to meet
application requirement, for some Actions,
execute the Action one-time or
THEN/ELSE Action are as follow:
One-Time: when the IF Condition is TRUE, this Action will be
executed once and only once. This Action will not be executed again
PMC/PMD offers options to
repeatedly. The setting options of
203