Internal Register; Figure11-24 : Internal Register Condition Setting Page - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual

11.1.14 Internal Register

Internal Register value can be used as evaluation criteria for IF condition
statement; the editing page for Internal Register Condition Setting is
shown as follow:
Follow the steps below:
i Select the Internal Register that you are going to use the value as
evaluation criteria for IF condition statement. Specify the Internal
Register Index from the dropdown list of "No." field.
ii Set up the expression statement for this Internal Register value.
Select an operator from "=",">","<",">=" or "<=".
iii And then specify the evaluation value. If this Internal Register value
match the evaluation criteria, the result of this condition evaluation
will be "true".
iv PMC/PMD provides 7 value options; you can compare them with
the Input Register value for condition evaluation. Please refer to
"11.1.1.3
value settings of these 7 options.
v Click "OK" button to confirm the settings and return to the Rule
settings page.

Figure11-24 : Internal register condition setting page

AI" section for more detailed information for comparison
202