Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
i No: The number will be the order that the power data of the Modbus
RTU power meter being stored in the PMC/PMD Modbus Table.
The range is 1~16.
ii Address: The address will be the Modbus address of this Modbus
RTU power meter, please make sure the address setting is the same
as the settings of the module, if the setting is not accurate, the
connection for PMC/PMD to the power meter will be failed.
iii Select the Power meter model:
iv Nickname: For user to define a nickname for this power meter, this
nickname will be displayed on the "Power meter Information" and
"Rule Setting" pages. Default setting will be the model of the power
meter.
v Click
power meter, click "Save" button to save the changes.
Figure7-8 :
Set up the No and Address of the power meter
Figure7-9 :
Select Modbus RTU Power Meter model
to add the meter to the list (Figure 7-10). After adding the
82
Advertisement
Table of Contents
