Internal Register Setting; Figure10-36 : Pue Setting Page(2) - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual

Figure10-36 : PUE Setting Page(2)

10.8 Internal Register Setting

PMC-5151 provides 48 Internal Registers; PMC-52xx/PMD provides 70
Internal Registers; they can be used to hold temporary variables and the
data can be read/written on the Registers via Modbus command. The data
on the registers can also be read and evaluated in IF Condition and be
written after performing a THEN/ELSE Action. In additional, the
PMC-52xx/PMD's Internal Registers of No.51 to No.70 provide the "Retain
Variable" mechanism. It means that the data inside these Internal Registers
will be retained even the PMC-52xx/PMD is in Power Off status. The
configuration page is shown as follow.
180