Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
iii Click "Add new SMS alarm", the SMS Alarm Setting page will
appear as follow:
iv Input name in the "Name" field and you could also input the
description of this SMS Alarm in the "Description" field.
v In the "Phone Number" section, click on "Add'' to input the phone
numbers to receive the SMS Alarm messages. The SMS can be sent
to multiple receivers. Keep on clicking "Add" to add all phone
numbers to receive the Alarm message, click "Remove" to remove
the phone numbers you want to delete.
vi Enter the content in the "Message" field. If the Unicode mode is
adopted, the length of the content cannot exceed 70 characters. If the
Unicode mode is not selected (will support English characters only),
the length of the content limit is 160 characters. SMS Alarm
provides an encoded string for you to add current I/O channel data,
power data or Internal Register data into SMS Alarm message. To
make it easy to add the encoded string, PMC provides "Real-time
variable editor". Please refer to
detailed information of the "Real-time variable editor".
vii Click on "OK" to confirm the setting and leave the setting page.
Figure10-7 :
SMS Setting Page (2)
"8.1 Data Logger
Setting" for more
158
Advertisement
Table of Contents
