Modbus Tcp Power Meter Setting; Figure7-17 : Pm-3114-Mtcp Setting Page - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual
After all settings are completed, click "OK" button to return to the
Power Meter List.
7.1.6

Modbus TCP Power Meter Setting

PMC/PMD support ICP DAS Single-phase Modbus TCP Power Meters,
the following section will give more detailed settings of the power
meter setting page. (Using PM-3144-MTCP as an example):
The settings are as follow:
 Nickname：For user to define nicknames for each power meter,
 Description: The Description field provides a space for the user
 IP: The address will be the IP address of this power meter,
 Port: The setting will be the Port number of this power meter,
Figure7-17 :
this nickname will be displayed on the "Power Meter
Information" and "Rule Setting" pages.
to make a brief description of this power meter.
please make sure the IP address setting is the same as the
settings of the module, if the setting is not accurate, the
connection for PMC/PMD to the power meter will be failed.
please make sure the Port number is the same as the settings of
PM-3114-MTCP Setting Page
88