Table of Contents
Advertisement
ICP DAS PMC/PMD Series User Manual
To modify the starting address or quantity setting, please click
If the user wants to assign a Nickname for the address blocks,
continuous Discrete Input data in the setting. So that the
PMC/PMD can access the 10020, 10021, 10022, 10023, 10024,
and 10025 Discrete Input address of the module, and these
retrieved Discrete Input data will be kept in PMC/PMD Modbus
Address 10300, 10301, 10302, 10303, 10304 and 10305.
Figure7-46 :
Discrete Input Setting Example for Modbus RTU Module
on the setting block and input the setting. Click "OK" for
modification or click "Remove" to remove the setting.
the user can click on the "Nickname Setting" tab, and then input
the Nickname for each address block. The Nickname will be
shown in the "I/O Information" and "Rule Setting" pages.
113
Advertisement
Table of Contents
