Updating Lighting Objects On A Range Of Playbacks; Updating Lighting Objects Via The Editor - Compulite Dlite User Manual

Compulite
Chapter 5
3 Press
The scene, chase step, or cue is loaded to the editor.
4 Select the fixtures and set the new levels.
Press

Updating lighting objects on a range of playbacks

Globally update scenes and cues, output from a range of playbacks, regardless of the type of
lighting object. If the object is a chase step, this procedure creates a new step.
Example: Dlite's current output is:
Playback Device Lighting object
Playback 2
Playback 3
Playback 4
To update lighting objects on a range of playbacks
Example: Update the objects on playbacks 2, 3, and 4.
1 Select fixtures and set levels.
2
Press
3 Press
4 Press
5 Press
6 The lighting objects output from playbacks 2, 3, and 4 are updated.

Updating lighting objects via the editor

To update scenes, cues, or chase steps
Example: Update Scene 1, or QList 1- cue,1 or Chase 1- step 1.
1 Press
2 To update scenes: Press
To update cues: Press
keypad).
To update chase steps: Press
editing keypad).
3 Press
84
.
ENTER
.
UPDATE
Scene 2
QList 5 cue 5
Chase 6 step 6
.
UPDATE
(playback).
PB
to select the range of playbacks.
2 4
.
ENTER
.
UPDATE
SCENE
and press
QLIST
CHASE
, , or
CHANNEL SPOT EXTRA
Editor levels
Channel 1 @ 85
Channel 10 @ 75
Channel 21 @ 63
and press on the keypad or tap 1 on the touch screen.
1
and then press
1
and press and then press
1
to select fixtures.
After update
Scene 2 is updated with the
editor levels.
Cue 5 is updated with the editor
levels.
Step 7, containing channel 1 @
85, channel 10 @ 75, channel
21 @ 63, is stored.
and press (on the editing
CUE 1
and press
STEP
(on the
1