Releasing Parameter Levels From The Editor; Resetting And Recalling The Editor; About Groups - Compulite Dlite User Manual

Releasing parameter levels from the editor

You can release fixtures, single or multiple parameters, or all parameter levels in the selected bank
from the editor. Released parameters and fixtures are not included when storing a scene, chase step,
or cue. Released parameters fade to home levels or maintain their current level, according to the
MAINTAIN LAST LEVEL
To release fixtures
Select fixtures and tap
To release one parameter
1
Select fixtures.
2 Press
3 Press a parameter wheel to select the parameter.
4 Tap
To release levels per parameter bank
1 Press
Skip this step if one of the parameters in the bank is active (appears in red in the live fixture
display).
2 Press
Or
Press
The levels for all the parameters in the selected bank are released from the editor.

Resetting and recalling the editor

Resetting the editor clears all selections and levels in the editor.
To reset the editor
Press
Or
Press
To recall the last editor state
Press
to pressing

About groups

setting ( see
RELEASE
, , or to choose the parameter bank.
F B C
or press
RELEASE REL
, or , or to select the parameter bank.
F C B
+ (ease)
SHIFT REL
and tap
SHIFT RELEASE
. All levels held in the editor are released in a 2 second fade.
RESET
quickly. All levels held in the editor bump out.
RESET RESET
. All fixtures and parameter levels, which were active in the editor prior
SHIFT + RESET
, are recalled to the editor.
RESET
"Maint. Last Level" page
or press (ease).
REL
(ease).
.
Selecting Fixtures and Setting Levels
165).
DLITE
49