Blind Editor - Compulite Dlite User Manual

Blind Editor

Fixture levels in the blind editor are not output.
Exiting the blind editor loads any fixture levels, in the blind editor, to the live editor where
they fade to zero.
ATTENTION!
the live editor.
To activate the blind editor
Press
The key's LED blinks. Blind mode is indicated on the external monitor where
is displayed in the title bar and there is an orange frame around the display.
To store cues in blind mode
1 Press
2 Select fixtures and assign values.
3 Use any store sequence.
To exit blind mode
Press
The key's LED turns off.
Press before exiting the blind editor, to avoid loading the levels to
RESET
.
BLIND
to enter the blind editor.
BLIND
.
BLIND
Selecting Fixtures and Setting Levels
Blind Editor
DLITE
55