Using Libraries As Base Value For Effects; Direction And Scope - Compulite Dlite User Manual

Base levels can be set:
Before accessing the effect editor by simply setting levels for the parameters that will be
participating in the effect.
Using the base wheel (wheel 3) in the
Using libraries.
To modify base levels
Select the fixtures and the parameter. Use the base wheel to change the parameter value.

Using libraries as base value for effects

Libraries may be used as templates for base levels.
To set base levels using libraries
Example: Use beam library 3 to set base levels for a new effect.
1 Select fixtures.
2
Apply beam library 3.
3 Press
4 Press
The touch screen is now in effect mode.
5
Select the effect.
The effect begins running immediately on the selected beam parameter.
6 Repeat steps 3 thorugh 5 until the effect is running on the required parameters.
7 Store the effect as a scene, chase step, cue, or effect library.
IMPORTANT!

Direction and scope

Up, down, and center determine the direction and scope of the effect in relation to the base value,
the starting point. Swing can be up, center, or down.
Up
to access the beam bank and select one of the parameters.
B
.
EFFECT
Tap to save the base levels in effect libraries.
+BASE
.
Effects Editor
DLITE
Effects
131