Selecting Fixtures Using The Universal Keys - Compulite Dlite User Manual

To select a sequential range of fixtures
SPOT
To select a non-sequential range of fixtures
SPOT
To remove fixtures from a range selection
SPOT
To cancel the entire selection
1
Press
To retrieve the last selection
1 Press the fixture type (channel, spot, or extra).
2
Press . The fixtures in the last selection are now available for editing.
To select the next or previous fixture
Example: The previous selection was spot 10. Select spot 11 or spot 10.
1
Press
2 Press
If you pressed
If you pressed
Note:

Selecting fixtures using the universal keys

A quick way to select fixtures is to use the U(niversal) K(eys).
ATTENTION!
To select fixtures
1 Press
The green LED, located on the panel next to
2 Select the fixture type by pressing
3 Press the UKs that correspond to the fixture numbers.
The respective UK LEDs are blinking. The fixtures are selected in the editor and can be
edited.
To select a range of fixtures
1 Select the fixture type by pressing
(or ,
CHANNEL EXTRA
(or ,
CHANNEL EXTRA
, (or ,
CHANNEL EXTRA
.
RESET
.
SPOT
or .
NEXT PREV
, spot 11 is selected.
NEXT
, spot 10 is selected.
PREV
Pressing +
SHIFT NEXT
current selection. Example: If the current selection is spot 10, pressing
adds spot 11 to the selection.
NEXT
The faders must be in context mode.
until context mode is active.
MODE
), , , . Selects all the fixtures in the range.
1 24
) or, , , , , . Selects fixtures 1, 6, and 9.
1 + 6 + 9
) , , , . Selects all fixtures in the range except 12.
1 24 —, 12
or + , adds the next or previous fixture to the
SHIFT PREV
Context
,
CHANNEL SPOT
,
CHANNEL SPOT
Selecting Fixtures and Setting Levels
SHIFT
, is on when context mode is selected.
, or .
EXTRA
, or .
EXTRA
DLITE
+
39