Programming Scenes; Storing Scenes; Storing Scenes On The Playbacks - Compulite Dlite User Manual

Compulite
Chapter 5

Programming scenes

A scene is a stand alone lighting object. Dlite supports up to 240 scenes. Scenes run on the
playbacks.
You can also store a single spot parameter in a scene, then load this scene to a playback and set
parameter levels using the playbacks to build the lighting objects.
scenes on playbacks" on page 157.

Storing scenes

Scenes can be stored:
Directly on playbacks
Using the console keys
Tapping cells on the touch screen grid
Pressing UKs when the faders are in Context mode

Storing scenes on the playbacks

Scenes can be stored directly on the playbacks. If the playback is on, the scene is immediately
output.
When storing a scene on playbacks you can specify a scene number using the keypad. If no number
is specified, Dlite chooses the first available scene number.
To store scenes using the playbacks
Example: Store a scene directly on playback 1.
1 Select fixtures and set levels.
2 Press
3
Press the
Figure 22: Playback with select key
When the command is successful
Dlite chooses the first available scene number.
4 Repeat steps 1 through 3 to store the next scene to the next playback.
Dlite automatically increments the scene number by 1.
68
.
STORE
key for playback 1.
SELECT
is displayed.
Scene Stored (#)
See "Using one- parameter