Playback Behavior - Compulite Dlite User Manual

Playback behavior

PB Jump Off Zero
off its bottom end stop (zero) or when turning the playback on of off by pressing its
Behavior setting
PB Jump Off Zero -
Enabled
PB Jump Off Zero -
Disabled
Playback Stomp
(for LTP parameters)
Enabled
Playback Stomp
(for LTP parameters)
Disabled
To set the default playback behavior
1 Press
and
Playback Stomp
Operation
Move a playback
slider off zero.
Press and hold
and move a playback
slider off zero.
With the slider at zero,
press the
SELECT
to turn the playback
on.
With the slider at full,
press the
SELECT
to turn the playback
off.
Moving the slider off
zero (without pressing
the key).
SELECT
Press
SELECT
the playback on.
.
SETUP
determine what happens when moving a playback slider
Playback behavior
All parameters, except dimmer, jump to their
stored levels. The dimmer value is controlled by
the slider and fades with the playback silder
movement.
All parameters fade to their stored levels.
SHIFT
All parameters, except dimmer, fade to their
key stored levels. The slider controls the dimmer
level.
All parameters are released and fade to their
key home levels. Dimmer fades to zero.
Nothing happens.
to turn All parameters, except dimmer, fade to their
stored levels. The slider controls the dimmer
level.
When all parameters output from a playback are
overridden, the playback is turned off.
Example: Playback 1 is active and outputs spots
1 through 4 set to blue and focussed on the drum
riser. If you now turn on playback 2, which
outputs the same moving lights running position
and color effects, playback 1 is released and no
longer active. If you stop playback 2, the param-
eters go to their home levels or tracking.
The system never stomps (overrides) the previ-
ously active playback. Referring to the example
above, when playback 2 is turned off, the spots
fade to the output from playback 1.
DLITE
Playbacks and the Crossfader
key.
SELECT
105