Proportional Patch
The proportional patch defines the dimmer intensity limits. Example: The output for a channel
proportionally patched at 60%, when the dimmer wheel is at FL, the output level is actually 60%.
Figure 18: Proportionate patch display
To define the proportional patch
Example: Set 60% as the highest level output for dimmers 10-12.
1
Press
2
Tap
The
3
Tap
Dimmer information (curve, proportional patch, and GM status) is displayed on the touch
screen and the external monitor.
4
Select the dimmers.
5
Tap
6
Use wheel 1 to set the dimmers Full level at 60%.
7
Tap
Dimmer curves
The dimmer curve is the dimmer behavior when fading from 0%-100%. There are 5 dimmer curves
available.
Curve Type
Linear
Inverted
Non-dim
Park
Preheat
Pulse
25% -100%
.
SETUP
.
PATCH BY FIXTURE
screen is displayed.
DMX Channel
.
DIMMERS
.
PROP. PATCH
.
OK
Description
Dimmer behavior default.
Output is inverted
Output is either 0 or FL
Dimmer output level is always at the parked level.
Dimmers can only be parked at 100%.
The dimmer is always maintained at 5%.
The dimmer fades from 0% to Full and back to 0%.
The dimmer begins its fade when reaching 25%/
DLITE
Patching
System
Output
10%
10%
10%
90%
< 50%
0
> 50%
FL
—
—
—
5%
0%
0%
50%
Full
Full
0%
27
Need help?
Do you have a question about the Dlite and is the answer not in the manual?