Using Park - Compulite Dlite User Manual

Compulite
Chapter 2
5 Press
To overwrite an existing patch
1 Press
2 Press
3 Tap Set.
An overwrite warning is displayed.
4
Tap

Using park

Fixture parameter levels, dimmer levels, and scenes can be parked at specific levels. Parked items
constantly output at their parked level and do not respond to level changes in the editor or to the
general master.
The proportional patch affects the output of parked dimmers. Example: If a dimmer has a propor-
tional patch of 50% and the dimmer or its patched fixture is parked at 70%, the output is 35%. This
is valid only when the proportional patch has been set before parking the dimmer or fixture.
Note:
Pressing
PARK
Park Options
PARK
UNPARK
UNPARK ALL
To park fixture parameters
1 Press
2 Select fixtures and parameters.
3 Set the parked level.
4
Press
Or
Press
5 Tap
To park dimmers
1 Press
2 Press
3 Set the parked level.
34
to exit the DMX port display.
RESET
and select the range of DMX addresses.
DIMMER
and select the channel range.
CHANNEL
to confirm the command.
OK
The general black out key (
, displays the park options on the touch screen.
What it does
Park selected items at the specified levels.
Free the selected items from their parked state.
Free the all parked items from their parked state.
.
PARK
.
PARK
.
ENTER
.
OK
.
PARK
and select dimmers.
DIM
) overrides parked items.
B.O.