Using The Grab Fader; Faders As Editor - Compulite Dlite User Manual

Compulite
Chapter 7

Using the grab fader

The grab fader captures fixtures and their parameter levels that are active in the editor. The captured
lighting look is temporarily saved as scene 0.
Figure 31: Grab fader
To grab the active editor
1 Select fixtures and set parameter levels.
2
Press
The
3 Optional - choose a store option.
4 Press the grab fader's
Temporary scene 0 is load to the grab fader. Control the grab fader's output level with the
fader handle.
To free the grab fader
1 Press
2 Press the grab fader's

Faders as editor

When
FADERS AS EDITOR
the editor are determined by a fader's amplitude. Example: In wide mode, fade up channel 1. This
level is now active in the editor. and appears on a white field.
This feature can provide a convenient way to build a lighting look, which can be saved as a scene,
chase step, or cue.
To enable/disable fader as editor
1 Press
2 Tap
3 Tap the
4
Tap
118
.
STORE
options are displayed.
STORE
SELECT
.
FREE
SELECT
is enabled, values from the faders are active in the editor. The levels in
.
SETUP
.
System Options
tab.
Behavior
.
FADERS AS EDITOR
key.
key.