Unique Fade Times For Parameters - Compulite Dlite User Manual

4 Turn wheel 2 until arriving at 15 (seconds).
5 Press
6 Turn wheel 2 until
7
Press

Unique fade times for parameters

Each parameter can be assigned a unique fade time that is independent of the scene, cue, or chase
step fade time.
Parameter time is indicated by
To set fade times for specific channels
1 Select the channel(s).
2
Set dimmer levels.
3
To set the fade in time, press
4 To set the delay time, press
Note:
5 Enter the required fade time and press
6
Store the scene, chase step, or cue.
To set parameter fade times for spot parameters
1 Select the spots(s).
2
Set the parameter levels.
3 Select the parameter receiving the unique fade time by pressing its wheel.
4 Press
5 Enter the required fade time.
6 Press
Or
Repeat steps 1 through 5 for other fixtures and parameters. When complete, press
7
Store the scene, chase step, or cue.
To set parameter fade times when editing lighting objects
1
Select the lighting object (
2 Select the fixtures.
3 Set the parameter levels.
4 Select the parameter receiving the unique fade time by pressing its wheel.
5 Press
6
Enter the required fade time and press
to select the beam bank.
B
is displayed.
Cut
or or tap
ENTER STORE
on the live display.
T/
TIME
When pressing to access delay time, the fade time that appears in the
TIME
command line is automatically saved.
.
TIME
.
ENTER
SCENE #
.
TIME
.
OK
and.
TIME
again.
.
ENTER
,
QLIST # CUE #
.
ENTER
Programming Lighting Objects
, or ).
CHASE # STEP #
DLITE
.
ENTER
95