Wheels In Parameter Mode; Paging Wheel Banks; Wheel And Trackball Resolution; Selecting Parameters - Compulite Dlite User Manual

Parameter levels are set using:
Wheels
Console keypad
Faders in context mode

Wheels in parameter mode

When fixtures are selected, the wheels are available for setting parameter levels. The first wheel
defaults to dimmer (intensity) for both channels and spots. For multi parameter spots, the wheels
are organized in banks according to the parameter type. Parameters are organized into F(ocus),
C(olor), or B(eam) types. Dimmer belongs to parameter type F(ocus).
Figure 20: Wheel assignments are displayed on the touch screen above the wheels

Paging wheel banks

If the number of parameters in the selected bank exceed three parameters, then there is more than
one page in the wheel bank.
To page wheel banks
Page to the next layer by pressing
Pressing and holding

Wheel and trackball resolution

Some parameters may require finer wheel or trackball resolution.
To switch to fine wheel or trackball resolution
Press the wheel (or trackball) and turn it.
OR
Press and hold

Selecting parameters

You may want to select specific parameters and set levels using the keypad.
To select a parameter
1 Select the spots.
2 Press
and pressing a bank key will return to the previous layer.
SHIFT
while turning the wheel (or trackball).
SHIFT
, , or to select the parameter bank.
F C B
, , or again.
F C B
Selecting Fixtures and Setting Levels
DLITE
43