Releasing Effects - Compulite Dlite User Manual

To program an effect without selecting a parameter
If you do not select a parameter before pressing
programmed effects are automatically displayed.
1 Select fixtures.
2 Press
The
3 Tap on one of the pre-programmed effects.
The effect begins running on the appropriate parameters.
4 Optional - adjust base, size, offset, rate, swing.
5 Store effect as a scene, chase, step, cue, or effect library.

Releasing effects

You can release all or some of the participating fixtures.
To release effects from the editor
Example: An effect is running, in the editor, on fixtures 1 thorugh 10. Release fixtures 1-3.
1 Select fixtures 1 thorugh 3.
2 Tap
The effect stops running on fixtures 1 through 3, but continues on fixtures 4 through 10.
To release effects stored in scenes, chase steps, or cues
Example: An effect is running, in scene 1, on fixtures 1 thorugh 10. Release fixtures 1-3.
1 Press
2 Press
The touch screen is now in
3 Select the scene.
4 Select fixtures 1 through 3.
5 Tap
The effect stops running on fixtures 1 through 3, but continues on fixtures 4 through 10.
6
Press
To freeze effects
1
Tap
The effect stops and
2 Tap
Tip!
.
EFFECT
screen is displayed, showing Dlite's pre-programmed effects.
Effect
.
RELEASE
.
EDIT
.
SCENE
.
RELEASE
to store the scene.
UPDATE
in the
FREEZE EFFECT
Hold
again to run the effect.
FREEZE EFFECT
Freeze an effect and then save the lighting state as scene, cue, or chase step.
EFFECT
mode.
Scene
editor.
Effect
appears in the cell of parameters participating in the effect.
, to open the effect editor, the pre-
DLITE
Effects
137