Copying Parameter Levels From Console Output - Compulite Dlite User Manual

To copy the level from a specific parameter and apply to a range of fixtures
Example: Copy the gobo setting from spot 1 in scene 2 to spots 1
1 Press
2
Press
3 Select spot 1.
4 Select the gobo parameter.
The level for all the selected parameter is copied.
5 Select spots 1
6
Press
7 Press
The copied level is applied to the selected range of spots and stored.

Copying parameter levels from console output

Copy and paste all levels or levels for selected parameters from the stage output to the selected
fixture.
To copy and paste all levels from the stage output
Example: Scenes 1
Scene #
1
2
3
1 Press
2 Press
3 Press
4 Press
5
Press
All output levels for spot 1 are copied to the selected spots.
To copy and paste a single parameter from the stage output
Example: Scenes 1
15.
1 Press
2 Press
3
Select x by pressing its parameter wheel.
4 Press
.
COPY
and select scene 2.
SCENE
10.
and select scene 5.
SCENE
or or
ENTER STORE UPDATE
3 are output from faders. Copy the levels from spot 1 to spots 10
Output from fader
4
5
6
.
COPY
and select spot 1.
SPOT
.
@
and select spots 10
SPOT
.
ENTER
3 are output from faders. Copy the pan (x) level from spot 1 to spots 10
.
COPY
and select spot 1.
SPOT
and select spots 10
SPOT
.
Output for spot 1
Dimmer Fl, X @ 65, Y@35
Cyan @ 30, Magenta @ 25
Gobo wheel @ (step) 9
15.
15.
DLITE
Programming Lighting Objects
10 in scene 5.
15.
89