Compulite Dlite User Manual page 157

Fan options What it does
Center mirror - Fan equally from center. The base value is taken from
the center fixture. Parameter values are fanned from the selection's
center fixture to the last fixture and from the center fixture to the first
fixture. The offset values increase from the middle to the ends.
Center diagonal - Fan from the center. The base value is taken from the
center fixture. Fan from the center fixture to the last fixture in the selec-
tion with ascending values and from center to the first fixture in the
selection with descending values. This can be used to create a see-saw
effect with pan or tilt.
NEGATIVE Flip the direction of the fan offset.
Examples of fan use:
Colors - Apply fan to cyan. The result is light cyan to dark cyan according the selection order.
You can add a fan applied to yellow and get graduated shades of green.
Iris - Applying fan to the iris, when the starting value of the first spot in the selection is a small
iris, gives you beams that ascend or descend in size.
DLITE
Effects
143