Connecting The Pcx-Rix8+Psu (Remote Input Expander With Psu) - Pyronix PCX 46 APP Installation & Reference Manual

7.3 Connecting The PCX-RIX8+PSU (Remote Input Expander with PSU)

PCX-RIX8+PSU
The PCX-RIX8+ is an input expander
that supports 8 inputs (not inertia)
and has a 2.5A power supply.
It supports normally closed (N/C),
DEOL and 3EOL input wiring.
The PCX 46 will support up to 4 x
Remote Input Expanders.
NOTE: The D2+ terminal should
not be connected.
7.3.1 PCX-RIX8+PSU Technical Specification
PCX-RIX8+PSU (Input Expander with Power Supply)
Input Voltage
Current Consumption
Inputs
Input EOL Resistor Values
Normal
Burglary Alarm
Fault
Masking (6k8)
PGM1 - PGM4
PGM1 - PGM4
PGM1 - PGM4
Power Supply Rating
Transformer Rating
Dimensions (metal box)
Dimensions (PCB)
Colour and Casing
Indication
Temperature
EN50131 Certified Grade 3
Front and rear tamper protected with one tamper switch
PD6662:2010 Installations – Back up battery time = 12hrs providing that a mains fail signal is
reported to the ARC.
A 17Ah battery, will support a maximum load of 1350mA for a period of 12 hours.
EN50131-1:2006+A1:2009 Installations - Back up battery time = 30hrs providing that a mains fail
signal is reported to the ARC.
A 17Ah battery, will support a maximum load of 497mA for a period of 30 hours. Installations which
are not supported by an ARC mains fail reported signal = 60 hours. A 17Ah battery, will support a
maximum load of 248mA for a period of 60 hours.
PCX 46 App Installation Reference
9-15V
65mA
Programmable
DEOL, N/C, 3 Resistor (Grade 3)
1k / 1k DEOL Range
0k5 to 1k4
1k5 to 5k9
6k to 8k1
8k2 to 17k
100mA each
Normal state: 12V
Active state: 0V
2.0A continued and 2.5A in peak when charging battery
44VA
390 x 305 x 100mm
215 x 125 x 65mm
White metal casing
LEDs (Power, RS485 In, A-Fault, RS485 Out, P-Fault)
Storage: -20°C to +60°C
Certified: -10°C to +40°C
Nominal: -10°C to +50°C
Page: 35
4k7 / 2k2 DEOL Range
1k4 to 2k9
4k2 to 7k8
8k to 11k3
11k6 to 22k
4k7 / 4k7 DEOL Range
3k7 to 8k3
8k4 to 10k2
10k3 to 14k9
15k to 22k