Introduction; Hybrid Integrated System With Automation Control; Two-Way Wireless Technology; User Automation Outputs - Pyronix PCX 46 App Programming Reference Manual

2. Introduction

2.1 Hybrid Integrated System with Automation Control

The is hybrid alarm system. It integrates the award winning Enforcer Two Way wireless
PCX 46 App
technology with 30 automation outputs and a host of high security features. The
use and designed to communicate to you about any system activations via our
smartphone App notification messages. It can also send alarms to the Alarm Receiving Centre and
maintenance company.

2.2 Two-Way Wireless Technology

Using the wireless input expansion module RIX 32-WE, the
wireless system taking full advantage of Pyronix' innovative wireless technology using the Pyronix High
Security Wireless Encryption Protocol. This module also allows the access to all Enforcer system 2-way
wireless peripherals.
Always Alert: The two way wireless movement detectors are fully operational when the system is
armed, making your system more secure, compared to other wireless systems, where devices are
disabled for up to five minutes after every activation to save battery, therefore compromising your
security.
Battery Monitoring/Saving: The Enforcer wireless peripherals use advanced technology to preserve
the battery life of each wireless device. However, the system informs you when a battery needs
replacing a month in advance before the device stops working. This key feature gives you enough time
to change the battery in the specific device. Other wireless alarm systems may not give you a low
battery warning signal, meaning that devices could stop working, leaving your environment unprotected.
High Security Encryption: The wireless protocol is encrypted with 128 bit making it practically
impossible to replicate or copy its wireless peripherals. It also uses an intelligent wireless jamming
detection technology.
User Friendly Keyfobs: Up to 32 wireless keyfobs can be added to the
wireless keyfob has its own user ID which can be reported to the ARC and user mobile phone. It is
possible to allocate different functions to each keyfob such as arming / disarming different areas,
activating the automation outputs to control external devices such as gates, requesting system status,
and activating panic alarms giving you total control of your system. It shows you the system status using
a 3 colour LED:
System armed: When the system is armed a RED LED will illuminate momentarily.
System disarmed: When the system is disarmed a GREEN LED will illuminate momentarily.
System fault: When the system is in fault condition an AMBER LED will illuminate.

2.3 User Automation Outputs

The has ability to operate up to 30 user automation outputs that give you the option activate
PCX 46 App
gates, lights, sprinklers, etc. via your keypad, wireless keyfob or smart phone app.

2.4 SMS Text Alarm Notifications

When your system is activated it will notify you via SMS text messages in real time. For example,
notification that your child has returned home from school safely or notification of a leakage of water in
your property etc.
2.5 System Remote Control with the HomeControl+ App
The system can be remotely controlled using the
PCX 46 App
you to arm and disarm the
you to activate remotely up to 30 devices such as gates, lights, sprinklers and more.
PCX 46 Programming Reference
, check the system status and bypass zones/inputs. It also allows
PCX 46 App
PCX 46 App
HomeControl+
Page: 3
PCX 46 App
HomeControl+
converts into a high security
system. Each
PCX 46 App
smartphone App. It allows
is easy to