Connecting The Pcx-Rox16R+Psu Expander (Remote Output Expander With Psu) - Pyronix PCX 46 APP Installation & Reference Manual

7.6 Connecting The PCX-ROX16R+PSU Expander (Remote Output Expander with PSU)

PCX-ROX16R+PSU
The PCX-ROX16R+PSU is an output
expander that supports 16 way relays and
has a 2.5A power supply.
The will support up to
PCX 46 APP
x Remote Output Expanders.
NOTE: The D2+ terminal MUST not be
connected.
7.6.1 PCX-ROX16R+PSU Technical Specification
PCX-ROX16R/PSU (Output expander with 16 PGMs and Power Supply)
Supply Voltage
Current Consumption
PGM1 to PGM16
PGM1 to PGM16 Type
PGM1 to PGM16 Normal State
PGM1 to PGM16 Active State
Power Supply Rating
Transformer Rating
Dimensions Metal Box
Dimensions PCB
Front and rear tamper protected with one tamper switch
Front and rear tamper protected with one tamper switch
A 17Ah battery, will support a maximum load of 1350mA for a period of 12 hours.
EN50131-1:2006+A1:2009 Installations - Back up battery time = 30hrs providing that a mains fail
signal is reported to the ARC.
A 17Ah battery, will support a maximum load of 497mA for a period of 30 hours.
Installations which are not supported by an ARC mains fail reported signal = 60 hours.
A 17Ah battery, will support a maximum load of 248mA for a period of 60 hours.
EN50131 Certified
7.6.2 Addressing The PCX-ROX16R+PSU (From the Expander)
PCX 46 App Installation Reference
2
9-15V DC
25mA, Max 340mA when all outputs are active
Programmable
Relay, 3A, max 30V
Changeover NC & NO
Changeover NC & NO
2.0A Continued and 2.5A in peak when charging battery
44VA
390 x 205 x 100mm
215 x 125 x 65mm
Grade 3
Page: 43