The Gprs Modem (Digi-Gprs); The Lan Modem (Digi-Lan) - Pyronix PCX 46 APP Installation & Reference Manual

8.2 The GPRS Modem (DIGI-GPRS)

The GPRS modem card (DIGI-GPRS) fits inside the
communications with the PyronixCloud and
following operations:
Send Alarms to the ARC:
With the DIGI-GPRS it is possible to send alarm events the monitoring station
via Contact ID IP an SIA IP protocols.
Send SMS Alarms to the user:
With DIGI-GPRS it is possible to send SMS alarm messages to the user.
Programming the panel remotely via the GPRS network:
With the DIGI-GPRS is also possible to program the
order to be able to use this feature it is necessary that the CSD data channel for
the SIM card used in the modem is activated. We recommend consulting with
the GPRS service providers for the availability of the CSD services on their
networks.
Fault Detection
Minimum time for the detection of a GPRS fault signal is 2 minutes, 30 seconds.
GPRS Status LEDs
IMPORTANT NOTE: REMOVE THE POWER SUPPLY OF THE DIGI-GPRS MODEM FROM PANEL WHEN
INSTALLING OR CHANGING THE SIM. NOTE: CHECK THE SIM CARD CREDIT REGULARLY.

8.3 The LAN Modem (Digi-LAN)

The LAN modem card (DIGI-LAN) fits inside the
communications with the PyronixCloud and
Ethernet internet connection cable and also has the following features:
Send Alarms to the ARC:
With the DIGI-LAN it is possible to send alarm events to the monitoring station
via Contact ID IP and SIA IP protocols.
Programming the panel remotely via secure network connection:
With the DIGI-LAN is also possible to program the
secure internet connection and use of the Insite UDL software.
Status LEDs
The Digi-LAN features the industry standard Ethernet /LAN cable connection
status and activity LEDs.
Micro SD slot
(for future features in development)
PCX 46 App Installation Reference
PCX 46 APP.
HomeControl+
PCX 46 APP
Antenna
The supplied antenna will need to be connected to the
GPRS and placed in a suitable area where the signal
46 APP
strength is to its maximum.
PCX 46 APP.
HomeControl+
PCX 46 APP
Page: 47
Besides
App, it has the
remotely. In
It allows
App via a standard
remotely via a
PCX