System Overview - Pyronix PCX 46 APP Installation & Reference Manual

1. System Overview

The is wired control panel that can have a maximum of 46 inputs. There are two versions
PCX 46 App
available:
PCX 46 App
They are both compatible with Two Way Enforcer wireless peripherals using the PCX-RIX32-WE.
System Overview
Areas:
Independent areas
Sub areas
Inputs:
Wired inputs
Wireless inputs
Maximum inputs
PGM Outputs:
PCB
ATE outputs
Maximum PGM outputs
User automation outputs
Codes:
Wireless key fobs
Maximum user codes
Duress / guard codes
Engineer codes
Arming Devices
Arming devices
Communication
Phone numbers
Modems /
Communication paths
Formats for ARC
Formats for User
Event Signaling UDL
Logs:
Memory logs
Memory type
Power Rating:
PSU
Battery type
Dimensions and Compliance
Dimensions:
EN grading*
Environment class
Default Codes: Master Manager Code: 1234 Engineer Code: 9999
*EN50131 compliance labeling should be removed if non-compliant configurations are used.
NOTE: Technical functions for example fire, gas and flooding are not security graded as they are outside
the scope of EN50131-1 and EN50131-3
PCX 46 App Installation Reference
S = Small box (Security Grade 2),
S
PCX 46 App PCX 46 App
8
7
8 On board
32
46
5 (3 and 2)
10
69
30
32
100 + 1 Master
10
1
6 Maximum
25
PSTN, GPRS, LAN, GSM
PSTN or VOICE PSTN:
GPRS or LAN or WiFi:
GSM:
SMS
Yes
1250
EEPROM
1.5A 2.0A
3-6Ah 7-17Ah
250 x 297 x 390 x 305 x
82mm 100mm
Grade 2 Grade 3
II II
PCX 46 App
Additional Information
L
Each sub-area is created by a proximity reader
Supports Double Pole (N/C), DEOL and 3EOL
32 = 1 x Wireless input expander: PCX-RIX8
46 = 4 x Wired/wireless input expanders: PCX-RIX8, PCX-
RIX8+, PCX-RIX8+PSU, PCX-RIX32-WE.
3 x Keypads/readers: PCX-LCD/EX, PCX-PROX/EXT, PCX-
PROX/INT
1 Relay, 4 transistor (Inputs 7 & 8 may be used as
outputs)
Low power ATE outputs
69 = 3 x Outputs on the PCB
2 x Shared outputs: XPGM 1&2 (Inputs 7&8)
2 x Output expanders: PCX-ROX8R8T, PCX-ROX16R+PSU
4 x Wired input expanders: PCX-RIX8+, PCX-RIX8+PSU
each have 4 outputs on board.
6 x Keypads or 1 x Keypad & 3 x Readers: 6 outputs
10 x ATE PGMs
Allows users to activate these outputs via keypad (PCX-
LCD/EX), mobile app, or keyfob (KF4-WE)
Using 1 x Wireless expander: PCX-RIX32-WE
Including wireless keyfobs: KF4-WE
PCX-LCD/EX, PCX-EXT-BK/W, PCX-PROX/INT
PSTN modem (DIGI-1200)
GPRS modem (DIGI-GPRS)
SIA Levels 1 & 3, CONTACT ID
SIA IP, CONTACT ID IP
CONTACT ID
SMS signals to a user's mobile phone. Also allows user
remote control panel via SMS commands
Using the upload/download software (UDL)
Power supply built onboard
Recommended batteries
PCB: 170 x 110 x 40mm
Page: 3
L = Large box (Security Grade 3).
GSM modem (DIGI-GSM)
LAN modem (DIGI-LAN)
(Voice PSTN for future use)
(WiFi for future use)