System Commands - Data Set (Index) 2 - Siemens SIRIUS ACT 3SU1 System Manual

Appendix
A.1 Process data and data sets
A.1.1.4

System commands - data set (index) 2

Data set (index) 2 - system commands
Table A- 4 Data set (index) 2 - system commands
Data set
Index (dec)
0x02 (2)
Permissible vendor-specific system commands (firmware-specific):
1)
Set authorization level 1
(system command 161 (0xA1))
Set authorization level 2
(system command 162 (0xA2))
Set authorization level 3
(system command 163 (0xA3))
Set authorization level 4
(system command 164 (0xA4))
Delete individually encodable ID
key
(system command 165 (0xA5))
Delete individually encodable ID
key using data set 80
(system command 166 (0xA6))
Delete all ID keys
(system command 167 (0xA7))
Add inserted ID key
(system command 168 (0xA8))
Add ID key using its number
(system command 169 (0xA9))
The new, individually encodable ID key can be added on the basis of the following system
commands:
Add ID key - system command
System command: Index: 2, subindex: 0
168 [0xA8]hex
169 [0xA9]hex
These new system commands are not supported in compatibility mode.
578
Access Parameter
w System Command
Length Default setting
(bytes)
1 —
1)
FW 1.4.0 (or FW 2.0.0 in
compatibility mode)
YES
YES
YES
YES
YES
YES
YES
NO
NO
Add inserted ID key
Add ID key using its number
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
FW 2.0.0 – supported command
NO
NO
NO
NO
YES
YES
YES
YES
YES