8.2.4
Base mounting for the enclosure
8.2.4.1
Equipping with contact and LED modules
The contact modules and LED modules are mounted in the enclosure base.
To equip an enclosure, follow these steps:
1. Snap the module
direction "A" here.
Refer also to the information on fitting in Chapter "Mounting positions (Page 224)".
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
①
onto a slot in the enclosure. The narrow snap hook must point in
3SU14 modules
8.2 Mounting
207