Siemens SIRIUS ACT 3SU1 System Manual page 386

3SU19 accessories
13.2 Identification of command points
Ordering notes
If an order involves a specific inscription, the Article No. must be supplemented with one of
the following order codes:
● Text line(s) in upper/lower case, upper case always for beginning of line (e.g. "Lift / Off"):
Q0Y
● Text line(s) in upper case (e.g. "LIFT"): Q1Y
● Text line(s) in lower case (e.g. "lift / off / lower"): Q2Y
● Text line(s) in upper/lower case, all words begin with upper case letters (e.g. "On Off"):
Q5Y
● Symbol with number according to ISO 7000 or IEC 60417: Q3Y
● Any inscription or symbol according to order form supplement: Q9Y
When ordering, specify the required inscription in plain text in addition to the article number
and order code. In the case of special inscriptions with words in languages other than
German, give the exact spelling and specify the language.
In the case of multi-line inscriptions, the text must be assigned to the respective line, e.g.
"Z1 = Lift, Z2 =Lower". For long words you can also specify the end-of-line division (see
ordering example 1).
Symbols can also be ordered with numbers according to ISO 7000 or IEC 60417 (see
ordering examples 2 and 3).
For special symbols (order code Q9Y), a CAD drawing in DXF format must be submitted.
The SIRIUS ACT Configurator must be used to select special inscriptions and symbols
(order code Q9Y). In this case a "CIN" (Configuration Identification Number) is generated for
placement of future orders. It is then possible to place an order directly using the CIN and
the SIRIUS ACT Configurator (Mall shopping cart) or via the standard ordering channels.
Standard ordering channels:
● Configurator: Internet (http://www.siemens.en/sirius-act/konfigurator)
● Electronic Catalog CA 01 on DVD
● Industry Mall: Internet (http://www.siemens.com/industrymall)
Ordering example 1
A label with a two-line text is required: 3SU1900–0AF16-0AZ0
Q1Y
Z1 = LIFT
Z2 = LOWER
Ordering example 2
A label inscribed with symbol No. 5011 according to IEC 60417 is required:
3SU1900–0AF16–0AZ0
Q3Y
Z = 5011 IEC
Ordering example 3
A label inscribed with symbol No. 1118 according to ISO 7000 is required:
3SU1900–0AF16–0AZ0
Q3Y
Z = 1118 ISO
386
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010