Locking devices for mushroom pushbuttons
Locking devices for selector switches
The locking devices for selector switches are not suitable for mounting on enclosures.
Note
Locking devices for selector switches require a hole (diameter 22.5 mm) with knock-out (acc.
to IEC 60947-5-1 D22) to prevent unauthorized switch actuation.
You will also find information in Chapter "Mounting dimensions (Page 460)".
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
Description
Locking device for mushroom pushbuttons
Suitable for:
Mushroom pushbuttons, 30 mm or 40 mm
•
diameter, with 22.5 mm mounting diameter
Installation in enclosures (command point in
•
center without protective collar) only in
combination with single-pole contact modules for
front plate mounting
Front plate mounting
•
Front plate thickness < 4 mm
Description
Locking device, left position
Suitable for:
Selector switches with 22.5 mm mounting
•
diameter, with short or long handle
Front plate mounting
•
Front plate thickness < 4 mm
Locking device, center position
Suitable for:
Selector switches with 22.5 mm mounting
•
diameter, with short or long handle
Front plate mounting
•
Front plate thickness < 4 mm
3SU19 accessories
13.3 Protection
Article number
3SU1950-0DP80-0AA0
Article number
3SU1950-0DQ80-0AA0
3SU1950-0DR80-0AA0
407