Protective Cap, Silicone-Free - Siemens SIRIUS ACT 3SU1 System Manual

3SU19 accessories
13.3 Protection
13.3.4

Protective cap, silicone-free

The protective cap is fitted before the actuating element is installed so as to protect the
element against dust and contamination. The material of the protective caps listed below is
silicone-free.
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221534)
400
Description
Protective cap for pushbuttons, flat
Suitable for:
All pushbuttons with 22.5 mm mounting diameter with
•
flat button and front ring
(not suitable for twin pushbuttons)
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for pushbuttons, raised
Suitable for:
All pushbuttons with 22.5 mm mounting diameter
•
(not suitable for twin pushbuttons)
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for selector switches, short selector
Suitable for:
All selector switches (short selector)
•
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for mushroom pushbutton, diameter
40 mm
Suitable for:
Mushroom pushbuttons, diameter 40 mm
•
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Article number
3SU1900-0ED70-0AA0
3SU1900-0EE70-0AA0
3SU1900-0EF70-0AA0
3SU1900-0EG70-0AA0
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010