Replacing An Io-Link Device (According To Io-Link Specification V1.1); Integration Into The Simatic Environment - Siemens SIRIUS ACT 3SU1 System Manual

12.1.6.3

Replacing an IO-Link Device (according to IO-Link specification V1.1)

Automatic saving of parameter data
If IO-Link masters and IO-Link devices according to the IO-Link Communication
Specification V1.1 are available, the "parameter server" function can be used to
automatically back up parameter data.
When devices are replaced, this parameter data is written back to the new IO-Link device
automatically on system startup.
However, this does not apply to individual ID keys in the electronic module for ID key-
operated switches. In this case, the ID keys must be recoded when a module is replaced.
12.1.7

Integration into the SIMATIC environment

Integration into the SIMATIC environment
Systematic diagnostics concepts and efficient handling of parameter data are demanded at
all levels of automation engineering. It is essential here that sensors and switching devices
are integrated into the automation network. The communication standard IO-Link offers new
possibilities in this regard by means of intelligent connection of sensors and switching
devices to the control level. The core points are switching, protecting, monitoring,
commanding and signaling at the field level. A block library is designed to make it easier for
end users to connect the IO-Link devices, and to demonstrate use of the library using actual
examples
You can download the library from the Internet
(https://support.industry.siemens.com/cs/ww/en/view/90529409) free of charge.
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
IO-Link 3SU14
12.1 Configuring the IO-Link
311