Siemens SIRIUS ACT 3SU1 System Manual page 103

Ordering notes
To order, the inscribed actuating and signaling elements can be selected via the SIRIUS
ACT Configurator. An electronic order form is then generated.
● See Internet (http://www.siemens.en/sirius-act/konfigurator) for Configurator
● Electronic Catalog CA 01 on DVD or
● Industry Mall: Internet (http://www.siemens.com/industrymall)
When ordering, supplement the Article No. of the actuating element or the indicator light with
"–Z" and an order code:
Text line in upper/lower case, always upper case for beginning of line (e.g. "Lift / Off"): Y10
Text in upper case (e.g. "LIFT"): Y11
Text in lower case (e.g. "lift / off / lower"): Y12
Text in upper/lower case, all words begin with upper case letters (e.g. "On Off"): Y15
Symbol with number according to ISO 7000 or IEC 60417: Y13
Any inscription or symbol according to order form supplement: Y19
When ordering, specify the required inscription in plain text in addition to the Article No. and
order code. In the case of special inscriptions with words in languages other than German,
give the exact spelling and specify the language. In the case of symbols with number, quote
the corresponding standard (see ordering example 1).
In the case of multi-line inscriptions, the text must be assigned to the respective line, e.g.
"Z1 = Lift, Z2 =Lower". For long words you can also specify the end-of-line division.
Symbols can also be ordered with numbers according to ISO 7000 or IEC 60417 (see
ordering examples 2 and 3).
The SIRIUS ACT Configurator must be used to select special inscriptions and symbols
(order code Y19). In this case a "CIN" (Configuration Identification Number) is generated for
placement of future orders. It is then possible to place an order directly using the CIN and
the SIRIUS ACT Configurator (Mall shopping cart) or via the standard order channels.
Ordering example 1 A round pushbutton with the inscription "Reset" is required:
3SU1030–0AD20–0AZ0
Y10 Z = Reset (English)
Ordering example 2 A square pushbutton requested with symbol No. 5389 according to
IE 60417:
3SU1030–0AD20–0AZ0
Y13 Z = 5389 IEC
Ordering example 3 A round pushbutton inscribed with symbol No. 1118 according to
ISO 7000:
3SU1030–0AD20–0AZ0
Y13 Z = 1118 ISO is required
Insert labels
You can use insert labels for labeling your devices.
You will find insert labels with standard inscriptions in Chapter "Accessories (Page 365)".
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
3SU10 pushbuttons and indicator lights
5.1 3SU10 devices for use on 3-slot holder
103